Fast & Honest Repairs
We Install Garage Doors on New Homes & Additions
If you're putting up a new house, a detached garage, an addition, or a commercial building, we handle the door and the opener. That includes reviewing the rough opening before it's framed, ordering to the right size, and scheduling the install so it lands where it belongs in your build.
We work with production builders, custom builders, general contractors, and homeowners acting as their own GC. The job is the same either way: a door that fits the opening, matches the house, and works on the day the inspector walks through.
What is Your Garage Doing?
Garage Doors for New Homes, Detached Garages, Barns & Commercial Builds
Single-Family New Builds
One house or a whole street. We coordinate around your framing and drywall schedule so the door goes in at the right stage of the build and doesn't sit in a finished garage collecting overspray and drywall dust.
Detached Garages & Outbuildings
New detached structures are one of the most common calls we get. They also come with their own complications — shallower headroom than an attached garage, non-standard widths, and no existing power run for the opener. All workable, as long as we know before the order goes in.
Additions & Garage Expansions
Turning a one-car into a two-car, or adding a bay onto an existing garage. The new opening has to work with what's already there, which usually means either matching the existing door or replacing both so the front of the house reads as intentional rather than patched.
Barns, Shops & Agricultural Buildings
Common across rural Harford County. These are oversized openings that standard residential doors won't cover, with doors that need to stand up to equipment traffic instead of a minivan and a couple of bikes.
Commercial & Warehouse Builds
Overhead and commercial doors, specified for the loading pattern and cycle count the building will actually see rather than whatever the general spec sheet defaults to.
Rough Opening Requirements
Check Headroom, Backroom & Sideroom Before You Frame
The most expensive mistake on a new build is framing an opening the door you want can't fit into. It's also the easiest one to avoid, because a five-minute conversation before framing solves it. Four things to check:
- Headroom — Standard-lift track typically needs about twelve inches of clearance above the opening. Less than that means low-headroom track or a wall-mount jackshaft opener, which has to be specified before the order, not after.
- Backroom — You generally need the door's height plus roughly eighteen inches of clear depth behind the opening for the track and opener. Ductwork, stairs, and storage platforms have a habit of appearing in exactly that space.
- Sideroom — Vertical track and hardware need a few inches of clear wall on each side of the opening. Framing tight against a corner or a window is a common surprise.
- Square and level — An opening that's out of square will show as uneven gaps and a door that seals poorly, no matter how good the installation is.
Send us your plans or rough dimensions and we'll confirm the opening works before your framer is standing there with a nail gun. Final clearances depend on the specific door and track, so check with us rather than relying on a general rule of thumb.
Choosing Your Door
Insulation, Material & Opener Options
Insulation
If there's living space above the garage or the buyer will use it as a workshop, an insulated door matters more in Maryland than most people expect. It's also far cheaper to spec correctly now than to replace a builder-grade uninsulated door in three years.
Material & Style
Steel, composite, carriage-style, modern flush panel, glass. On a spec home, the door is a large fraction of what a buyer sees from the street — it's worth more attention than it usually gets.
Openers
Chain, belt, or wall-mount jackshaft, with battery backup and smart controls available. Belt drives are noticeably quieter, which matters when there's a bedroom over the garage.
What to Expect
Our Garage Repair Process
01.
Tell us what the door is doing.
Call or text a description of the problem. A photo or short video tells us more than words usually can, and it lets us load the right parts before we head out.
02.
We inspect the whole system.
Not just the part that failed. A snapped spring usually means its twin is close behind, and worn rollers explain why the opener has been straining for months.
03.
You get the price upfront.
We explain what failed, what it takes to fix it, and what it costs. Nothing gets done until you say go.
04.
We repair it and test it.
That includes checking the door's balance and the safety reverse, then walking you through what we changed.
Common Concerns
Frequently Asked Questions
Can you fix it the same day?
Often, yes, during regular hours — Monday through Friday, 7:30 AM to 4:00 PM — especially for common failures like springs and rollers that we carry on the truck. For doors that fail overnight or on a weekend, we run a 24-hour emergency line. Call early for the best chance at a same-day slot.
Is an estimate free?
Yes. Call or text a description of the problem, ideally with a photo, and we'll quote from there.
My spring broke. Can I still get my car out?
Not safely on your own. With the spring gone, the door's full weight is unsupported. Call us and leave it alone until we arrive.
Should I replace both springs if only one broke?
Usually. Springs are installed as a matched pair and wear at the same rate, so the second one is typically not far behind. We'll show you the condition of both and let you decide.
Do you repair commercial and warehouse doors?
Yes, along with residential garages.
Do you service doors you didn't install?
Yes. We repair all major brands regardless of who installed the door originally.
